AskerNoktasi.Com Soru-Cevap alanına hoş geldiniz. Üye olmadan soru sormak sürekli aynı soruların sorulması nedeniyle askıya alındı. Üye olmak için Tıklayınız..
0 oy
Be the first
20 gösterim
Astsubay kategorisinde (40 puan) 1

Laser is an amazing operating method in the modern society. Many Laser Machines like Laser Cutting Machine and Laser Welding Machine are used in plenty of industries and companies.

Why lasers are used for cutting? Lasers are used for many purposes. One way they are used is for cutting metal plates. On mild steel, stainless steel, and aluminum plate, the laser cutting process is highly accurate, yields excellent cut quality, has a very small kerf width and small heat affect zone, and makes it possible to cut very intricate shapes and small holes.

Most people already know that the word “LASER” is actually an acronym for Light Amplification by Stimulated Emission of Radiation. But how does light cut through a steel plate?

How a laser cutter works? The laser beam is a column of very high intensity light, of a single wavelength, or color. In the case of a typical CO2 laser, that wavelength is in the Infra-Red part of the light spectrum, so it is invisible to the human eye. The beam is only about 3/4 of an inch in diameter as it travels from the laser resonator, which creates the beam, through the machine’s beam path. It may be bounced in different directions by a number of mirrors, or “beam benders”, before it is finally focused onto the plate. The focused laser beam goes through the bore of a nozzle right before it hits the plate. Also flowing through that nozzle bore is a compressed gas, such as Oxygen or Nitrogen.

Focusing the laser beam can be done by a special lens, or by a curved mirror, and this takes place in the laser cutting head. The beam has to be precisely focused so that the shape of the focus spot and the density of the energy in that spot are perfectly round and consistent, and centered in the nozzle. By focusing the large beam down to a single pinpoint, the heat density at that spot is extreme. Think about using a magnifying glass to focus the sun's rays onto a leaf, and how that can start a fire. Now think about focusing 6 KWatts of energy into a single spot, and you can imagine how hot that spot will get.

The high power density results in rapid heating, melting and partial or complete vaporizing of the material. When cutting mild steel, the heat of the laser beam is enough to start a typical “oxy-fuel” burning process, and the laser cutting gas will be pure oxygen, just like an oxy-fuel torch. When cutting stainless steel or aluminum, the laser beam simply melts the material, and high pressure nitrogen is used to blow the molten metal out of the kerf.

On a CNC laser cutter, the laser cutting head is moved over the metal plate in the shape of the desired part, thus cutting the part out of the plate. A capacitive height control system maintains a very accurate distance between the end of the nozzle and the plate that is being cut. This distance is important, because it determines where the focal point is relative to the surface of the plate. Cut quality can be affected by raising or lowering the focal point from just above the surface of the plate, at the surface, or just below the surface.

There are many, many other parameters that affect cut quality as well, but when all are controlled properly, laser cutting is a stable, reliable, and very accurate cutting process.

As for Laser welding, it is one of the oldest applications of industrial laser materials processing. In the majority of early applications, lasers produced higher quality welds and allowed for greater productivity. Often times, it was at a lower cost compared to other joining processes, even though the parts being welded were originally designed based on a different joining process.

Much has changed, however, since those early days of laser welding. For starters, the classes of lasers have changed. Laser sources now have higher power, different wavelengths and a wider range of pulsing capability. Accordingly many Accessories for laser machine came into being. Add to this the new developments in beam delivery, machine control hardware and software, process sensors and a better understanding of the laser welding process.

Bu soruya cevap vermek için lütfen giriş yapınız veya kayıt olunuz.

Hoş geldiniz, Askernoktasi - Uzman Erbaş - Astusbay - Subay -Sözleşmeli Er sizlere sorularınızın diğer üyelerimiz tarafından cevaplanması için bir ortam sağlar.

3.1k soru

8.2k cevap

151 yorum

12.5k üye

En iyiler 03/2024
  1. 80Sumeyye

    839 puan

  2. jwemknn5

    40 puan

  3. tedyifu39

    40 puan

Kategoriler

19 Çevrimiçi Kullanıcı
0 Üye 19 Misafir
Bugünkü Ziyaretler : 2281
Dünkü Ziyaretler : 7214
Toplam Ziyaret : 9017471

İlgili sorular

0 oy
Be the first
0 cevap
13 Ocak 2022 Astsubay kategorisinde qiangaaa112 (40 puan) 2 sordu
0 oy
Be the first
0 cevap
14 Nisan 2022 Astsubay kategorisinde auxkongtiao414 (37 puan) sordu
0 oy
Be the first
0 cevap
12 Nisan 2022 Astsubay kategorisinde misafir sordu
0 oy
Be the first
0 cevap
12 Nisan 2022 Astsubay kategorisinde misafir sordu
0 oy
Be the first
0 cevap
7 Nisan 2022 Astsubay kategorisinde misafir sordu
...