AskerNoktasi.Com Soru-Cevap alanına hoş geldiniz. Üye olmadan soru sormak sürekli aynı soruların sorulması nedeniyle askıya alındı. Üye olmak için Tıklayınız..
0 oy
Be the first
Astsubay kategorisinde (40 puan) 1

A Short Article on Mechanical Fasteners

A mechanical fastener is a device that is used to mechanically join (or fasten or affixes) two or more objects together. In general, fasteners are used to create non-permanent joints; that is, joints that can be removed or dismantled without damaging the joining components.

A welding joint or riveted joint can be termed as a permanent joint, which if required to be removed tends to damage or destruct both the joining components as well as the joint itself.

Mechanical fasteners are usually made of stainless steel, carbon steel, or alloy steel. There are many different types of mechanical fasteners being used in many different industry sectors. Some of them that are extensively being used in the process piping industry will be detailed out in this article.

Bolts

Bolts are mechanical fasteners used for the assembly of two non threaded components, with the aid of washer and nut. A bolt has a head on one end and threads on the other end. When the objects are fastened, the bolt holds the objects together, and washer and nut fasten from the other end that holds it firmly.

Bolted joint is a combination of the nut applying an axial clamping force and the plain non threaded length (known as shrank) of the bolt pinning the joint against sideways shear forces. The non threaded grip length should be chosen carefully, to be around the same length as the thickness of the material and washers through which the bolt passes. An overly long non threaded length prevents the nut from being tightened down correctly. An insufficient non threaded length results in the threads extending into the hole, and places the shear load onto the threads, which may cause wear on the hole. No more than two turns of the thread should be within the hole.

Screws

Screws, similar to bolts, have head on one end and threads on the other end. However, screws usually have longer threads than bolts, also they can be made with slotted heads. Screws are used in components which contain their own thread or the screw may even cut its own internal thread into them. Screws are used to fasten objects by digging in and wedging into a material when turned, while the thread cuts grooves in the fastened material that may help pull fastened materials together and prevent pull-out.

A screw will usually have a head on one end that allows it to be turned with a tool. The head is usually larger than the body of the screw, which keeps the screw from being driven deeper than the length of the screw and to provide a bearing surface. The cylindrical portion of the screw from the underside of the head to the tip (known as the shank) may be fully threaded or partially threaded.

Bu soruya cevap vermek için lütfen giriş yapınız veya kayıt olunuz.

Hoş geldiniz, Askernoktasi - Uzman Erbaş - Astusbay - Subay -Sözleşmeli Er sizlere sorularınızın diğer üyelerimiz tarafından cevaplanması için bir ortam sağlar.

1.2k soru

7.9k cevap

144 yorum

6.1k üye

En iyiler 12/2021
  1. 80Sumeyye

    57 puan

  2. buwen123

    40 puan

  3. shuibao122

    40 puan

Kategoriler

16 Çevrimiçi Kullanıcı
0 Üye 16 Misafir
Bugünkü Ziyaretler : 864
Dünkü Ziyaretler : 6047
Toplam Ziyaret : 1442645

İlgili sorular

0 oy
Be the first
0 cevap
5 gün önce Astsubay kategorisinde bulaya130 (40 puan) 1 sordu
0 oy
Be the first
0 cevap
0 oy
Be the first
0 cevap
26 Kasım Astsubay kategorisinde meihao1125 (40 puan) 1 sordu
0 oy
Be the first
0 cevap
0 oy
Be the first
0 cevap
25 Kasım Astsubay kategorisinde dangao124 (40 puan) 1 sordu
...